Troubleshooting - NEFF C47C42 Instruction Manual

Troubleshooting

Malfunctions often have simple explanations. Please read the
following instructions before calling the after-sales service.
Repairs may only be carried out by fully trained after-sales
service technicians. Incorrect repairs to your appliance may
present considerable risks for the user.
Problem
The appliance does not work
The appliance cannot be started
The appliance cannot be started. "Des-
cale" appears in the text display.
The appliance cannot be started. "Clean"
appears in the text display.
: flashes in the clock display
‹ ‹‹
‹ : ‹‹ flashes in the clock display,
appears in the temperature display
The appliance is not in operation. A cook-
ing time is shown on the display.
"Safety cut-out" appears in the text display
and flashes in the temperature dis-
‹‹‹
play
‹‹‹ flashes in the temperature display
"Fill water tank" appears even though the
water tank is full
"Fill water tank" appears even though the
water tank is not yet empty, or the water
tank is empty but "Fill water tank" does not
appear
The water tank empties for no discernible
reason. The evaporator dish overflows
The evaporator dish has boiled empty
even though the water tank is full.
"Empty/Clean tank?" appears in the dis-
play
26
Possible cause
The plug is not plugged in
Power cut
Circuit-breaker faulty
Faulty operation
The appliance door is not fully closed
The appliance is not switched off
Descaling has been cancelled
Cleaning aid was cancelled
Power cut
Power cut during cooking
§§§
The Start button was not pressed after the
setting had been made.
Automatic safety cut-out is active
The appliance is not switched off
The water tank has not been inserted
properly
The detection system is not working
The water tank is dirty. The moving water
level indicators are jammed
The water tank was not closed properly
The tank lid seal is dirty
The tank lid seal is faulty
The water tank has not been inserted
properly
The feed line is blocked
The appliance has not been used for at
least two days and the water tank is full
:
Risk of electric shock!
Work on the appliance electronics may only be performed by
■
a specialist.
Always disconnect the appliance from the power supply
■
when work is carried out on the electronics. Switch off the
circuit breaker or remove the fuse from your household fuse
box.
Notes/remedy
Connect the appliance to the electricity
supply
Check whether other kitchen appliances
are working
Check in the fuse box to make sure that
the circuit-breaker for the appliance is OK
Switch off the circuit-breaker for the appli-
ance in the fuse box and switch it back on
after approx. 10 seconds
Close the appliance door
Turn the operating mode selector back to
the
Û
Press the Start button. Then rinse the
appliance twice (see section: Descaling).
Proceed as described in the section "Emp-
tying the evaporator dish and refilling the
water tank".
Press the Start button. Then rinse the
appliance twice (see section: EasyClean®
cleaning aid. Proceed as described in the
section "Emptying the evaporator dish and
wiping out the appliance")
Reset the clock (see section: Electronic
clock)
Press the
the clock (see section: Electronic clock)
Press the Start button or delete the setting
with the Stop button
Turn the operating mode selector back to
the
Û
Turn the operating mode selector back to
the Û
Push in the water tank until it locks into
place.
Call the after-sales service
Shake and clean the water tank. If the
parts cannot be freed, obtain a new water
tank from the after-sales service
Close the lid until you feel it lock into place
Clean the seal
Obtain a new water tank from the after-
sales service
Push in the water tank until it locks into
place
Descale the appliance. Check whether the
water hardness range is set correctly
Empty and clean the water tank. Always
empty the water tank after cooking
position and switch on again.
KJ clock function button, reset
position and lock it in place
position and lock it in place