Planet VIP-156 User Manual page 13

4 Reset
Machine default IP is http://192.168.0.1. Press RESET button on rear panel for
over 5 seconds to reset the VoIP Phone Adapter to factory default value. (Except
speed dial and call forward settings)
LED display of VIP-156 / VIP-156PE
LED Indicators
PWR
STATUS
LNK/ACT
RING
LED display of VIP-157 / VIP-157S
LED Indicators
STATUS
LNK/ACT
RING 1
RING 2
Reset to the factory default setting
Power is supplied to the device.
The Status LED will flash when the machine is operational
OFF: the device is connected to LAN at 10Mb/s.
ON: the device is connected to LAN at 100Mb/s.
OFF: the phone is idle.
ON: the phone is in use (off hook).
Blinking: the phone is ringing.
The Status LED will flash when the machine is operational
OFF: the device is connected to LAN at 10Mb/s.
ON: the device is connected to LAN at 100Mb/s.
OFF: the phone is idle.
ON: the phone is in use (off hook).
Blinking: the phone is ringing.
OFF: the phone is idle.
ON: the phone is in use (off hook).
Blinking: the phone is ringing.
SIP Analog Telephone Adapter
Descriptions
Descriptions
13