Planet VIP-156 User Manual page 33

Field
Call Waiting
Ring Timeout
Caller ID Scheme
CID Type II
T.38 (FAX)
T.38 Pass-through
codec
VIP-157
Description
Default is enable.
When you are talking with other people, You can choose If you want to
hear the notice when there is a new incoming call. If the call waiting
function is On, if there is a new incoming call, you will hear the call
waiting notice in your current call. If you set the function to Off, then
you will not hear any notice.
Default is 60(sec). After how long the system will reply the busy(486
busy) message.
Set the caller ID mode, it supports FSK Bellcore, DTFM, CID-Japnan,
DTMF-Brazil, DTMF-Denmark.
FSK Bellcore: FSK caller ID mode.
DTMF: Before first ringing,it will send the DTMF caller ID data.
CID-Japan: Japan (Japan) caller ID mode
DTMF-Brazil: Brazil (Brazil) caller ID mode
DTMF-Denmark: Denmark (Denmark) caller ID mode
To enable the show caller ID function in call waiting.
When enable this function system receives a new call in call waiting. It
will display the caller ID
Your Phone must also support CID Type2.
E
nable/Disable T.38 FAX function.
Define the T.38 pass-through codec, it can support G.711 u-law/G.711
a-law.
SIP Analog Telephone Adapter
33