Graco Ultra 395 Operation Manual page 8

Throughout these instructions, Model 233960 is shown in all illustrations. Your sprayer model may look slightly
different than pictured.
TI2597a
1 Connect Graco airless
hose to sprayer.
Tighten securely.
ti2812a
5 Check inlet strainer for
clogs and debris.
8
Setup
2 Connect other end of
hose to gun.
Approximate Fill Level
6 Fill throat packing nut
with TSL to prevent
premature packing wear.
Do this each time you
spray.
ti2702a
3 Tighten securely.
ti2707a
7 Turn power OFF.
ti2769a
ti2703a
4 Remove tip guard.
ti2810a
8 Plug power supply cord
into a properly grounded
electrical outlet.
Setup
309665L