F Testing / Maintenance - Siemens FIREFINDER-XLS Installation, Operation And Maintenance Manual

F
TESTING / MAINTENANCE If the system is connected to the fire department, etc., or actuates an internal
system, disarm the appropriate outputs before servicing to prevent actuation. (See
PMI Operation for procedures.) Notify the fire department and personnel at your
facility that a System test is being performed so that any alarm sounding can be
ignored during the test. Notify the fire department before resetting the system.
Inspection, Testing, and Maintenance of the fire alarm system should be peformed in
accordance with NFPA 72, The National Fire Alarm Code and all applicable local codes.
11
APPENDIX