Zephyr Tornado II AK8200AS Use, Care And Installation Manual page 8

Min 26" - Max 36"
36"
DUCTING
dual and remote blowers.
Always use rigid type metal ducts only. Flexible
available duct run when using elbows, transitions
and caps.
ALWAYS, when possible, reduce the number or
transitions and turns. If long duct run is required,
increase duct size.
If turns or transitions are required; install as far
away from hood duct output and as far apart,
between the two as possible.
www.zephyronline.com
Minimum mount height between range top to hood
Maximum mount height should be no higher than
It is important to install the hood at the proper
mounting height. Hoods mounted too low could
mounted too high will be hard to reach and will
If available, also refer range manufacturer's height
clearance requirements and recommended hood
mounting height above range.
AK8200AS
Vertical Ducting:
Horizontal Ducting:
N/A
AK8300ASX
Vertical Ducting:
Horizontal Ducting:
N/A
DAMAGE-SHIPMENT / INSTALLATION:
installation.
unit to the store in which it was bought for
repair or replacement.
or replacement is the responsibility of the
customer.
be made by arrangement between customer
and installer.
6