Zephyr Tornado II AK8200AS Use, Care And Installation Manual page 19

REPLACING LIGHT BULBS
CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns.
Make sure all power is turned off and bulbs are not hot.
Remove by turning bulb counter clockwise. Note: Bulb does not unscrew; it turns 60 degrees, stops and
falls out.
diameter of the bulb or use a rubber/latex glove and turn counter clockwise.
For Zephyr part numbers please turn to page 19 of the manual.
Bottom View
17