Adjustment Lever For Zigzag Stitch And Needle Position; Reverse-Feed Key - Pfaff 918 Instruction Manual

7

Adjustment lever for zigzag stitch and needle position

.05
Fig. 7 - 05
7

Reverse-feed key

.06
Fig. 7 - 06
4
M
L
R
3
2
1
The zigzag stitch adjustment lever 1 is
used for adjusting the width of the zigzag
stitch.
To change the position of the adjustment
lever, the locking lever 2 must be
pressed against the adjustment lever 1.
By turning the needle-position
1
adjustment lever 4 the required needle
position can be set.
L = needle-position left
M = needle-position center
R = needle-position right
The machine sews in reverse as long as
the reverse-feed key 1 is pressed.
Controls
The current zigzag-stitch width
can be seen on scale 3.
7 - 3