Controls
7
Stitch position adjustment lever
.07
7
Reverse feed control key / limiting the stitch length for reverse sewing
.08
1
B
Fig. 7 - 07
Fig. 7 - 08
A
0
2
1
To set the required stitch position adjust
the stitch position adjustment lever 1.
Position "A" = stitch positioned to the left
Position "O" = stitch positioned in the centre
Position "B" = stitch positioned to the right
As long as the reverse feed control key 1
is pressed, the machine sews in reverse.
By turning screw 2, the stitch length for
reverse sewing is limited.
7 - 4