FLIR ThermaCam P25 User Manual page 110

15 – Troubleshooting
Problem
The LCD/viewfinder dis-
plays an infrared image, but
it is blurry.
The LCD/viewfinder dis-
plays a visual image, but it
is blurry.
The LCD/viewfinder dis-
plays an image, but it is of
low illumination.
When connecting the in-
frared camera to an exter-
nal video monitor, no image
appears.
It is not possible to store
any more images in the
camera.
The LCD/viewfinder does
not display the correct date
& time.
15
96
Possible reason
The target may be out of focus.
The ocular diopter adjustment of the
viewfinder may be incorrect.
The target may be out of focus.
The illumination of the LCD may have acci-
dentally been set to too low a value.
The video cable connector may not be
properly inserted into the video connector
on the camera.
The video cable connector may not be
properly inserted into the video connector
on the external monitor.
The camera may have accidentally been
set to PAL video format, while the external
video monitor will only display NTSC video
format, and vice versa.
The internal flash memory may be full.
The CompactFlash card may be full.
The camera may have accidentally been
set to the wrong date & time.
Publ. No. 1557978 Rev. a155 – ENGLISH (EN) – February 6, 2006
Solution
Focus the camera by
pressing and holding down
the A button for a few sec-
onds.
Change the ocular diopter
adjustment by rotating the
adjustment knob on the
bottom side of the
viewfinder.
Focus the visual camera by
rotating the focus ring on
the visual camera.
Change the illumination of
the LCD.
Verify that the video cable
connector is properly insert-
ed.
Verify that the video cable
connector is properly insert-
ed.
Change the video format.
To be able to save more
images, download the im-
ages to your computer us-
ing ThermaCAM™ Quick-
View.
To be able to save more
images, move the images
from the CompactFlash
card by downloading them
to your computer using
ThermaCAM™ QuickView,
or replace the card with an
empty card.
Change the date & time.