Advertisement
Slightly to press the place with
1.
remote control. (As show in figure)
2
Take out the old batteries. (As show in figure)
3.
Insert two new AAA1.5V dry batteries, and pay attention to the polarity.
(As show in figure)
4
Attach the back cover of wireless remote control. (As show in figure)
NOTE:
When changing the batteries, do not use the old or different batteries,
otherwise, it can cause the malfunction of the wireless remote control.
If the wireless remote control will not be used for a long time, please
take them out, and don't let the leakage liquid damage the wireless
remote control.
The operation should be in its receiving range.
It should be placed at where is 1m away from the TV set or stereo sound sets.
If the wireless remote control can not operate normally, please take them out,
after 30s later and reinsert, if they cannot normally run, please change them.
, along the arrowhead direction to push the back cover of wireless
Sketch map for
changing batteries
ON/OFF
COOL light (blue)
DRY light (green)
RUN light (red)
HEAT light (orange)
Unit ON/OFF button
Advertisement
