Nortel BCM50 3.0 Installation And Maintenance Manual page 89

Figure 40 Attach the BCM50 unit to the wall-mount bracket
4 Press the unit against the wall-mount bracket and slide the unit down until it clicks in place.
5
Slide the wall-mount lock to the left (lock position). See the figure
position on page 89.
Figure 41 Wall-mount lock in lock position
6
Use the supplied screw to secure the wall-mount lock in position.
7 Repeat steps 1 to 6 for each additional BCM50 unit you install.
8 Install the power supply using a method appropriate for your installation. For details about
installation options, see Installing the BCM50 power supply
Chapter 7 Installing the main unit
Wall-mount lock in lock
on page 92.
Installation and Maintenance Guide
89