Installation - Kenwood KMR-700U Instruction Manual

Installation

Main unit Installation
1
Attach the template (accessory 5) at the
installation position.
2
Tap holes (main unit mounting hole x 1, screw
holes x 7) on the mounting surface based on the
template (accessory 5).
Mounting surface
91.0
79.0
36.0
77.5
⁄
• Decide the size of screw holes according to the mounting
surface material.
3
Remove the template (accessory 5).
4
Install the main unit.
⁄
• Install the main unit together with the waterproof rubber.
Waterproof feature is only provided with the waterproof
rubber attached.
91.0
79.0
36.0
4.0
77.5
(mm)
Waterproof rubber
Tapping screw
(Φ4 x 30 mm)
(Accessory3)
Hideaway unit Installation
Tapping screw (Φ4 x 16 mm)
(Accessory4)
⁄
• Install the hideaway unit in a place free from water
exposure.
• Before installation, check that no fuel tank, pipe, nor wire
exists at backside of the mounting surface, to prevent
screws from penetrating into such component.
25
|
English