Getting Started; Removing Ipod Or Usb Device - Kenwood KMR-700U Instruction Manual

Getting Started

Conn Co Co Co C o C C C nnec ti ting ti i i i i iP P P od d d d
1 1 1 1
Press the Release button.
Pull the faceplate open, while supporting it with
your hand.
2 2 2 2
Remove the terminal cover.
②
③
①
3 3 3 3
Pull out the terminal to be used, and then
replace the terminal cover.
4 4 4 4
Connect iPod and USB device to the terminal.
5 5 5 5
Insert the connected iPod and USB device into
the cushion bag (accessory), and place it on
the terminal cover.
Cushion bag
4
|
KMR-700U
or US U U SB SB S B devi d d d i i i ce
Release button
Terminal cover
⁄ ⁄ ⁄ ⁄ ⁄
• Be sure to use the cushion bag which protects iPod
USB device against shock.
• Do not overload the opened faceplate. If you do so,
the faceplate may be damaged.
6
Close the faceplate.

Removing iPod or USB device

1
Enter Remove mode
Press the [iPod] button for at least 2 second.
"REMOVE" is displayed.
2
Select the device to be removed
Select the device to be removed by turning
the [VOL] knob, and press the [ENTER]
3
Turn the [VOL] knob to select "YES", and then
press the [ENTER] button.
4
Press the Release button.
Pull the faceplate open, while supporting it with
your hand.
5
Remove the device.
Only the device selected in step 2 can be
removed.
⁄
• Keep the unused terminal in the terminal cover to
avoid being damaged.
Cancelling the Remove mode
Press the [iPod] button for at least 1 second.
or
button. . .