Menu System - Kenwood KMR-700U Instruction Manual

Menu System

Set up the following functions.
Item Setting
"Skip Search" "0.5%"*/ "1%"/
"5%"/ "10%"
"Beep" "OFF"/ "ON"*
"Clock Adjust" —
"Date Adjust" —
"Date Mode" —
"ILM Dimmer" "Auto"*/ "Manual"/
"OFF"
"ILM Effect" "OFF"/ "ON"*
"DISP Dimmer" "Auto"*/ "Manual"/
"OFF"
"Contrrast" "1" – "10"
"DISP N/P" "POSI 1"/ "2"
/ "NEGA 1"/ "2"
"AMP" "OFF"/ "ON"*
"Supreme" "OFF"/ "ON"*
"Seek Mode" "Auto1"*/ "Auto2"/
"Manual"
"Seek Mode" "Channel"*/ "Preset"
"Auto Memory" —
"CRSC" "OFF"/ "ON"*
"ESN=" —
"Name Set" —
"Scroll" "Auto"*/ "Manual"
"Favorite Delete" —
"Built in AUX" "OFF"/ "ON"*
"Audio Preset" —
"Backup MEM DEL" —
"SYS F/W VER" —
*Factory setting
** Refer to <Menu Glossary> (page 22).
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set during USB source.
: Can be set only during playback of the iPod source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set during Satellite radio source.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
8
|
KMR-700U
Entry Setting overview
Sets the ratio of skip performed with <Music Search for iPod>.
Setting the operation check sound (beep sound) ON/OFF.
1 sec. Sets the clock.
1 sec. Sets the date.
1 sec. Sets the date display format.
Sets whether the key illumination is dimmed in conjunction with
the light switch of the vessel or it is dimmed constantly.
Sets whether the key illumination brightness is changed in
conjunction with the key operation.
Sets whether the display illumination is dimmed in conjunction
with the light switch of the vessel or it is dimmed constantly.
Adjusting the display contrast.
Switches the panel display between positive or negative.
Turns on/off the built-in amplifier.
Turns ON/OFF the Supreme function.
Selects the tuning mode of the radio.
Sets the seek mode of satellite radio.
2 sec. Memorizes six stations with good reception automatically.
Switches to Monaural to decrease noise when reception is poor.
Displays the Electronic Serial Number of satellite radio.
Sets the display when switched to AUX source.
1 sec.
Specifies whether the text is scrolled automatically.
1 sec. Deletes Favorite Preset Memory.
Sets whether to display AUX during source selection.
1 sec. Registering the value setup by Audio Control.
1 sec. Initializes the settings of "MENU", etc.
Display the firmware version and update the firmware.
1
Enter menu mode
Press the [ ] button for at least 1 second.
"MENU" is displayed.
2
Select the menu item
Tune the [VOL] knob.
3
Set the menu item
Press the [ ] or [
Usually, menu items are set by pressing the [
or [ ] button. Some items, however, requires that
the [ENTER] button being pressed for at least 1 or
2 seconds, before the settings can be made.
or icon is displayed in the "Entry" column for
2 sec.
such an item.
4
Exit menu mode
Press the [ ] button.
Condition Page
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
] button.
1 sec.
12
—
5
5
5
**
—
**
—
**
**
**
**
19
11
—
—
10
—
17
—
15
16
—
]