Display Settings; Display Type Selection; Display Side Selection; Text Display Selection - Kenwood KMR-700U Instruction Manual

Display Settings

Display Type Selection

Shown below are examples of display types.
Display Display Type
"TYPE [A]" Displays 4 lines of text.
"TYPE [B]" Displays 3 lines of text and the status (ON/OFF
indicator for each function).
"TYPE [C]" Displays 3 lines of text.
"TYPE [D]" Displays 2 lines of text and the status (ON/OFF
indicator for each function).
1
Enter Display setup mode
Press the [DISP] button.
2
Select the Display type select item
Tune the [VOL] knob.
Select the "Type Select" display.
3
Enter Display type select mode
Press the [ENTER] button.
4
Select the Display type
Tune the [VOL] knob.
5
Exit Display type select mode
Press the [DISP] button.
To exit the display setup mode, press the [DISP]
button for at least 1 second.
⁄
• The source icon and the text title at left side of the
display can be changed.
• To change the text to be displayed, refer to <Text Display
Selection> (page 10).

Display Side Selection

Setup the left side of the display.
1
Enter Display setup mode
Press the [DISP] button.
2
Select the Display side select item
Tune the [VOL] knob.
Select the "Side Select" display.
3
Enter Display side select mode
Press the [ENTER] button.
4
Select the Display side
Tune the [VOL] knob.
You can select among the title of the displayed
text, icon for the source being played, and none.
5
Exit Display side select mode
Press the [DISP] button.
To exit the display setup mode, press the [DISP]
button for at least 1 second.
9
|
English