Satellite Radio Tuner Control (Optional Accessory); Basic Operation; Category And Channel Search - Kenwood KMR-700U Instruction Manual

Satellite Radio tuner control (Optional accessory)

Basic Operation

Selecting Satellite Radio source
Press the [TUN] button.
Select the "SIRIUS" display.
⁄
• You need to register to the service provider to receive
the service by Satellite Radio. Consult the service
provider if "CALL ... TO SUBSCRIBE" appears.
• The radio may take a little time to start receiving after
you select the Satellite Radio source.
• If the signal reception fails, "Acquiring Signal"/ "No Signal"
appears.
Switching Seek Mode
Select Seek Mode item
Select the "Seek Mode" display.
For how to select menu items, refer to <Menu
System> (page 8).
Display Operation
"Channel" Normal manual seeking control.
"Preset" Search in order of the channels in the Preset memory.
Select the channel
Press the [ ] or [
Selecting the Preset Band
Press the [u] button.
Each time you press the button, the preset band
alternates between the SR1, SR2, SR3 and SR4.
Channel Scan
Press the [u] button for at least 1 seconds.
Pressing this button for 2 seconds or longer allows
you to check individual channel for 10 seconds
each. Pressing this button again for 2 seconds or
longer allows you to exit this mode.
Preset Memory
Press the desired [1] — [6] button for at least 2
seconds.
Preset Tuning
Press the desired [1] — [6] button.
] button.

Category and Channel Search

Selecting the channel and category you want to
receive.
1
Enter Category and Channel Search mode
Press the [ ] button.
2
Select the Category
Turn the [VOL] knob to select Category, and
then press the [ENTER] button.
3
Select the Channel
Turn the [VOL] knob to select Channel, and
then press the [ENTER] button.
Cancelling Category and Channel Search mode
Press the [ ] button.
⁄
• You cannot Channel search until the category
information is acquired.
19
|
English