Speaker Setting; Switching Display - Kenwood KDC-W6537U Instruction Manual

Speaker Setting

Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [VOL] knob.
3
Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting alternates
between the settings shown in the table below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [VOL] knob.

Switching Display

Changing the information displayed.
1
Enter Switching Display mode
Press the Control knob for at least 1 second.
"DISP SEL" is displayed.
2
Select the Display item
Push the Control knob towards right or left.
In Tuner source
Information
Program Service name or Frequency
(FM)
Radio text, Program Service name or
Frequency (FM)
Frequency (MW, LW)
Clock
In CD & External disc source
Information
Disc title
Track title
Track number & Play time
Clock
Display
"SP OFF"
"SP 5/4"
"SP 6*9/6"
"SP OEM"
Display
"FREQ/PS"
"R-TEXT"
"FREQ"
"CLOCK"
Display
"D-TITLE"
"T-TITLE"
"P-TIME"
"CLOCK"
In Audio file source
Information
Music title & Artist name
Album name & Artist name
Folder name*
File name
Play time & Music number
Clock
In Standby/ Auxiliary input source
Information
Source name
Clock
3
Exit Switching Display mode
Press the Control knob.
⁄
• When the music number exceeds 1000, only the last 3
digits of its number are displayed.
• When you select the clock display, the display setting of
each source will be changed to the clock display.
• Music title, Artist name, and Album name cannot be
displayed in WAV file.
• If the selected display item does not have any
information, alternative information is displayed.
• * When playing music from iPod or music edited by
"Music Editor", the folder name display may show
something different such as playlist or artist name
depending on the music selection procedure.
Display
"TITLE"
"ALBUM"
"FOLDER"
"FILE"
"P-TIME"
"CLOCK"
Display
"SRC NAME"
"CLOCK"
|
9
English