Table of Contents
Advertisement
Installation
Installation
Metal mounting strap
(commercially available)
Firewall or metal support
Self-tapping screw
(commercially available)
Screw (M4X8)
(commercially available)
⁄
• Make sure that the unit is installed securely in place. If the
unit is unstable, it may malfunction (for example, the sound
may skip).
Bend the tabs of the
mounting sleeve with a
screwdriver or similar utensil
and attach it in place.
Screwing the Faceplate on the Unit
If you want to fasten the faceplate to the main unit
so that it does not fall off.
1
Refer to the section <Removing the hard rubber
frame> and then remove the hard rubber frame.
2
Drop open the faceplate by pressing the Release
button.
Tighten the screw (ø2 × 5 mm) (Accessory 4) and
3
bracket (Accessory 5 ) in the hole shown on the
diagram.
Accessory5
Accessory4
Tighten the screw (ø2 × 5 mm) (Accessory 4) and
4
bracket (Accessory 6) in the hole shown on the
diagram.
¤
• Never insert the screws in any other screw hole than the
one specified. If you screw them in another hole, it will
contact and may cause damage to the mechanical parts
inside the unit.
Accessory6
Accessory4
|
35
English
Hide quick links:
Advertisement
Table of Contents
