View Or Download The Scanned Images - Avision FS-0913B User Manual

Note:
1. Be sure to disconnect the USB cable before scanning. The scanner is not able to scan
while the USB cable is connected to your computer.
2. If you place the scanner vertically on the page, your scanned
image will be rotated. Follow these steps to get a correct
orientation of your image.
a. Press the "JPG PDF" button choose PDF file format.
b. Press the "STD HQ" button for about 5 seconds，the "Rotate
90° right" icon ( ) will be shown in the screen.
c. Finally, scan the page from the right to the left, your scanned
image will be rotated and displayed correctly. (Note only PDF
file supports the rotation feature.)

2.2.5 View or download the scanned images

1. To view or download your scanned images, you can either remove the micro SD card
and connect it to a card reader, or connect the scanner to your computer via the "Data
Cable" connector of the supplied USB cable (be sure to turn on your scanner). If there
are two USB ports available, it is recommended to plug both the USB connectors of the
USB Y cable to your computer.
2. Your computer should recognize the card or the scanner as a Removable Disk.
3. Click the Removable Disk and you will find a folder of "DCIM" is created and all the PDF
files will be stored in the subfolder of "200DOC" and the JPEG files in the subfolder of
"100PHOTO". File name starts from IMG_0001.pdf or IMG_0001.jpg.
Each scanned image is given a file name with the prefix IMG_ followed by a 4-digit
sequential number in the order the images are stored. For example, IMG_0001.jpg,
IMG_0002.jpg,IMG_0001.pdf, IMG_0002.pdf, etc.
JPG files are stored in a sub folder titled DCIM\100PHOTO. The folder stores 9999
photo files, and then automatically creates another sub folder titled 101PHOTO, and so
on to 199PHOTO.
2-6