Mechanical disassemblies
Disassemble should be made following procedures in numerical order.
Following steps show the basic procedures, therefore unnecessary step may be
ignored.
caution:
The parts and screws should be placed exactly the same position as the original other-
wise it may cause lose of performance and product safety.
The wiring method of the leads and ferrite cores should be returned exactly the same
state as the original, otherwise it may cause lose of performance and product safety.
1
cabinet top ass'y removal.
1. Remove the screws-A(Mx10) from the bottom side.
2. Remove the screws-B(Mx8) and remove the Cabinet top ass'y.
. Remove the screws-C(T2.6x6), remove the Button and DEC. LED.
B
B
cabinet top assy
- 17 -
Screws Expression
(Type
Diameter x Length
T type
Tapping screw
cabinet top assy
B
A
A
cabinet top
dec. Led
Button
c
c
c
) mm
M Type
Machine screw
A