Resetting The Filter Counter; Cleaning The Projection Lens; Cleaning The Projector Cabinet - Sanyo PLV-Z800 Service Manual

Maintenance and Cleaning

resetting the Filter counter

Be sure to reset the Filter counter after cleaning or replacing the air filter.
1
Turn the projector on and press the MENU button to display the
On-Screen Menu. Select the Setting Menu with the Point
buttons. Press the Point
items.
2
Select Filter counter and then use the Point 8 button to select
[Reset] and press the OK button. "Filter counter reset?" appears.
Select [Yes] and then press the OK button.
3
Another confirmation dialog box appears, and select [Yes] to
reset the Filter counter.
✔
Note:
• Do not reset the Filter counter without cleaning or replacing the air filter. Be
sure to reset the Filter counter only after cleaning or replacing the air filter.

cleaning the Projection Lens

Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that contains
a small amount of non-abrasive camera lens cleaner, or use a lens
cleaning paper or a commercially available air blower to clean the
lens. Avoid using an excessive amount of cleaner. Abrasive cleaners,
solvents, or other harsh chemicals might scratch the surface of the
lens.
When the projector is not in use, make sure that the automatic slide
shutter is closed.

cleaning the Projector cabinet

Unplug the AC power cord before cleaning.
Gently wipe the projector body with a dry soft cloth. When the
cabinet is heavily soiled, apply a small amount of mild detergent
and finish with a dry soft cloth. Avoid using an excessive amount of
cleaner. Abrasive cleaners, solvents, or other harsh chemicals might
scratch the surface of the cabinet.
When the projector is not in use, put it in an appropriate carrying case
to protect it from dust and scratches.
or OK buttons to access the submenu
8
Filter counter
ed
- 12 -
Select Filter counter and
use the Point 8 button to
select [Reset] and press the
OK button. "Filter counter
reset?" appears.
Select [Yes] and press
the OK button, then
another confirmation
box appears.
Select [Yes] again to reset
the lamp counter.