Sanyo PLV-Z800 Service Manual page 25

10-
1 Lamp unit removal.
1. Loosen the 2 screws-A and remove the Lamp unit.
2. Remove the screw-B (Tx8) and remove the Main board holder.
10-
2 Lamp connector removal.
1. Remove the 2 screws(TX6) and remove the Lamp connector.
Ballast cable
caution:
When remove the Lamp ballast cable,
be carefull not to damade the cable.
Main board holder
A
Lamp unit
Lamp connector
- 25 -
Mechanical disassemblies
B