Mechanical disassemblies
10-
4 Lamp unit holder removal.
1. Remove the 2 screws-A (Tx8) and remove the Lamp unit holder.
2. Remove the screwB (Tx8) and remove the Lamp cover switch(SW880) board.
. Remove the 2screws-C (Tx8), remove the Spacer, remove the Cap and remove the Thermal switch(SW902).
A
A
Lamp unit holder
Lamp cover switch(SW8803) board
B
Spacer
c
cap
c
thermal switch(SW902)
- 27 -