Advertisement
Mechanical disassemblies
Disassemble should be made following procedures in numerical order.
Following steps show the basic procedures, therefore unnecessary step may be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original otherwise it may cause lose of
performance and product safety.
The wiring method of the leads and ferrite cores should be returned exactly the same state as the original other-
wise it may cause lose of performance and product safety.
Before disassemblies:
Turn off a projector and disconnect the AC power cord.
Smoke resistant box removal from a Projector.
1.
Hold the Smoke Resistant Box with one hand and Loosen 4 screws A.
Remove the Smoke Resistant Box.
Caution:
Be careful do not damage connector.
Align the connector of projector with the
connector pins of the Smoke Resistant Box.
Connectors
Pins
A
A
Phillips-Head Screwdriver
Fig. 12
- 7 -
A
A
Fig. 11
Advertisement
