Optical Adjustment - Sanyo PLV-Z800 Service Manual

Optical Adjustment

Before taking optical adjustments below, remove the Cabinet Top following to the "Mechanical Disassemblies".
Adjustments require a 2.0mm hex wrench, Philips Screwdriver and a slot screwdriver. When you adjust Integrator lens or Relay
lens adjustment, you need to disconnect some connectors and FPC cables of LCD panels on the main board.
Note:
Do not disconnect connectors on the main board, because the projector can not turn on or operate properly for
adjustment.
WArNING : uSe uV rAdIAtIoN eYe ANd SKIN ProtectIoN
cAutIoN: to prevent suffer of uV radiation, those adjustments
Fixed (LENS RELAY_OUT)
Do not adjust
(1) contrast adjustment
Polarized glass (G)
optical filter (G)
Fixed (LENS CONDENSOR_OUT)
Do not adjust
durING SerVIcING
must be completed within 25 minutes.
(1) contrast adjustment
Polarized glass (r)
optical filter (r)
(1) contrast adjustment
Polarized glass (B)
- 45 -