Troubleshooting - Sanyo PLV-Z800 Service Manual

Troubleshooting

● Flow chart of projector condition
<ACCIDENT>
(A) : Press MENU + INPUT KEY for 5 sec. (or press MENU KEY on R/C for 20 sec.)
(with AC power supply and Mains SW : ON)
AC OFF STAND-BY
<RECOVER>
(ON/STAND-BY KEY)
WARNING POWER ON
(Lamp : ON)
(20 sec.)
PROGRAM
NORMAL
REPLACE
MODE
(A)
SERVICE
SUSPEND
MODE
(Lamp : OFF)
--> [S] mark display (for 5 sec.)
--> UP + DOWN KEY or R/C SCREEN KEY for 3 sec.
(Return to normal with ON/STAND-BY KEY)
(90 sec.)
COOLING
(Slide Shutter error)
<ACCIDENT>
(Slide Shutter error, Lamp error)
(with signal or any KEY)
SUSPEND
COUNTDOWN
(no signal 30 sec.)
(with signal
(no signal 5 min.)
or any KEY)
(90 sec.)
SUSPEND
COOLING
- 82 -
(Lamp : OFF)
(Lamp : ON)