TP-Link TL-WR740N User Manual
  1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Wireless Router
  5. TL- WR740N
  6. User manual

TP-Link TL-WR740N User Manual

150mbps wireless n router
Hide thumbs Also See for TL-WR740N:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Manual
TL-WR740N
150Mbps Wireless N Router
Rev: 1.0.0
1910010682

Advertisement

Table of Contents
loading

Related Manuals for TP-Link TL-WR740N

Summary of Contents for TP-Link TL-WR740N

  • Page 1 TL-WR740N 150Mbps Wireless N Router Rev: 1.0.0 1910010682...

  • Page 2: Fcc Statement

    Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.

  • Page 3: Ce Mark Warning

    FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.

  • Page 4: Declaration Of Conformity

    TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: 150Mbps Wireless N Router Model No.: TL-WR740N Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives:...

  • Page 5: Table Of Contents

    TL-WR740N 150Mbps Wireless N Router CONTENTS Package Contents .......................... 1 Chapter 1. Introduction......................... 2 Overview of the Router....................2 Conventions ......................... 2 Main Features ......................3 Panel Layout ........................ 4 1.4.1 The Front Panel....................4 1.4.2 The Rear Panel ....................5 Chapter 2.
  • Page 6 TL-WR740N 150Mbps Wireless N Router 4.7.3 Dành riêng địa chỉ................... 47 Đang chuyển tiếp ....................... 48 4.8.1 Server ảo ......................48 4.8.2 Cổng kích hoạt ....................50 4.8.3 DMZ........................ 52 4.8.4 UPnP ......................52 Bảo mật........................53 4.9.1 Bảo mật cơ bản ....................54 4.9.2 Bảo mật nâng cao ..................
  • Page 7 TL-WR740N 150Mbps Wireless N Router 4.16.7 Mật mã......................87 4.16.8 Bản ghi hệ thống .................... 88 4.16.9 Thống kê......................90 Appendix A: FAQ .......................... 92 Appendix B: Configuring the PCs....................97 Appendix C: Specifications ....................... 100 Appendix D: Glossary........................ 101...

  • Page 8: Package Contents

    150Mbps Wireless N Router Package Contents The following items should be found in your package: TL-WR740N 150Mbps Wireless N Router DC Power Adapter for TL-WR740N 150Mbps Wireless N Router Quick Installation Guide Resource CD for TL-WR740N 150Mbps Wireless N Router, including: •...

  • Page 9: Chapter 1. Introduction

    Flexible Access Control The TL-WR740N 150Mbps Wireless N Router provides flexible access control, so that parents or network administrators can establish restricted access policies for children or staff. It also supports Virtual Server and DMZ host for Port Triggering, and then the network administrators can manage and monitor the network in real time with the remote management function.

  • Page 10: Main Features

    TL-WR740N 150Mbps Wireless N Router 1.3 Main Features Make use of IEEE 802.11n wireless technology to provide a wireless data rate of up to 150Mbps One 10/100M Auto-Negotiation RJ45 WAN port, four 10/100M Auto-Negotiation RJ45 LAN ports, supporting Auto MDI/MDIX...

  • Page 11: Panel Layout

    TL-WR740N 150Mbps Wireless N Router 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 Front Panel sketch The Router’s LEDs and the QSS button are located on the front panel (View from left to right). Name Status Indication Power is off.

  • Page 12: The Rear Panel

    Router to reboot. POWER: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this TL-WR740N 150Mbps Wireless N Router. ON/OFF: The switch for the power. 1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(s).

  • Page 13: Chapter 2. Connecting The Router

    TL-WR740N 150Mbps Wireless N Router Chapter 2. Connecting the Router 2.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Router is connected directly to the Ethernet.) PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors TCP/IP protocol on each PC Web browser, such as Microsoft Internet Explorer 5.0 , Netscape Navigator 6.0 or above...
  • Page 14 TL-WR740N 150Mbps Wireless N Router electrical outlet. The Router will start to work automatically. Power on your PC and Cable/DSL Modem. Figure 2-1 Hardware Installation of the TL-WR740N 150Mbps Wireless N Router...

  • Page 15: Chapter 3. Quick Installation Guide

    TL-WR740N 150Mbps Wireless N Router Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your TL-WR740N 150Mbps Wireless N Router using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default domain name of the TL-WR740N 150Mbps Wireless N Router is http://tplinklogin.net, the default IP address is 192.168.0.1, and the default Subnet Mask is 255.255.255.0.

  • Page 16: Quick Installation Guide

    ® With a Web-based (Internet Explorer or Netscape Navigator) utility, it is easy to configure and manage the TL-WR740N 150Mbps Wireless N Router. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser.
  • Page 17 TL-WR740N 150Mbps Wireless N Router To access the configuration utility, open a web-browser and type the default address http://tplinklogin.net in the address field of the browser. Figure 3-3 Login the Router After a moment, a login window will appear, similar to the Figure 3-4. Enter admin for the User Name and Password, both in lower case letters.
  • Page 18 TL-WR740N 150Mbps Wireless N Router Figure 3-6 Choose WAN Connection Type The Router provides Phát hiện tự động function and supports three popular ways PPPoE, IP Động and IP Tĩnh to connect to the Internet. It’s recommended that you make use of the Phát hiện tự...
  • Page 19 TL-WR740N 150Mbps Wireless N Router If the connection type detected is Dynamic IP, the next screen will appear as shown in Figure 3-8. If you are visiting the Router from the main computer, please select Đúng, and then click Sao địa chỉ MAC đến.
  • Page 20 TL-WR740N 150Mbps Wireless N Router Figure 3-10 Quick Setup - Static IP Địa chỉ IP - This is the WAN IP address seen by external users on the Internet (including your ISP). Enter the IP address into the field. Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0.
  • Page 21 TL-WR740N 150Mbps Wireless N Router SSID - Enter a value of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. Considering your wireless network security, the default SSID is set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each Router’s MAC address).
  • Page 22 TL-WR740N 150Mbps Wireless N Router If you don’t make any changes on the Không dây page, you will see the Hoàn tất page as shown in Figure 3-12. Click the Hoàn tất button to finish the Cài đặt nhanh. Figure 3-12 Quick Setup – Finish If there is something changed on the Không dây page, you will see the Hoàn tất page as...

  • Page 23: Chapter 4. Configuring The Router

    TL-WR740N 150Mbps Wireless N Router Chapter 4. Configuring the Router This chapter will show each Web page's key functions and the configuration way. 4.1 Login After your successful login, you will see the sixteen main menus on the left of the Web-based utility.

  • Page 24: Cài Đặt Nhanh

    TL-WR740N 150Mbps Wireless N Router Figure 4-1 Router Status 4.3 Cài đặt nhanh Please refer to 3.2: "Quick Installation Guide." 4.4 QSS This section will guide you to add a new wireless device to an existing network quickly by QSS (Thiết lập bảo mật nhanh) function.

  • Page 25: Qss

    TL-WR740N 150Mbps Wireless N Router Choose menu “QSS”, and you will see the next screen (shown in Figure 4-2 ). Figure 4-2 QSS Trạng thái QSS - Enable or disable the QSS function here. Mã PIN hiện tại - The current value of the Router's PIN displayed here. The default PIN of the Router can be found in the label or User Guide.
  • Page 26 TL-WR740N 150Mbps Wireless N Router Step 2. Press and hold the QSS button of the adapter directly for 2 or 3 seconds. Step 3. Wait for a while until the next screen appears. Click Finish to complete the QSS configuration.
  • Page 27 TL-WR740N 150Mbps Wireless N Router Step 2. For the configuration of the wireless adapter, please choose Push the button on my access point in the configuration utility of the QSS as below, and click Next. The QSS Configuration Screen of Wireless Adapter Step 3.
  • Page 28 TL-WR740N 150Mbps Wireless N Router Method Three: Step 1. Keep the default QSS Status as Đã kích hoạt and click the Thêm thiết bị mới button in Figure 4-2, then the following screen will appear. Figure 4-3 Add A New Device Step 2.
  • Page 29 TL-WR740N 150Mbps Wireless N Router Step 4. Wait for a while until the next screen appears. Click Finish to complete the QSS configuration. The QSS Configuration Screen of Wireless Adapter By PIN If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by PIN with the following two methods.
  • Page 30 TL-WR740N 150Mbps Wireless N Router Step 3. For the configuration of the wireless adapter, please choose Enter a PIN into my access point or a registrar in the configuration utility of the QSS as below, and click Next. The QSS Configuration Screen of Wireless Adapter Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown.
  • Page 31 TL-WR740N 150Mbps Wireless N Router The QSS Configuration Screen of Wireless Adapter Note: The default PIN code of the Router can be found in its label or the QSS configuration screen as Figure 4-2. Step 3. You will see the following screen when the new device successfully connected to the network.

  • Page 32: Mạng

    TL-WR740N 150Mbps Wireless N Router 4.5 Mạng Figure 4-4 the Network menu There are three submenus under the Network menu (shown in Figure 4-4 ): WAN, LAN and Bản sao MAC. Click any of them, and you will be able to configure the corresponding function.
  • Page 33 TL-WR740N 150Mbps Wireless N Router Kích thước MTU (đơn vị Byte) - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default Kích thước MTU (đơn vị Byte) unless required by your ISP.
  • Page 34 TL-WR740N 150Mbps Wireless N Router DNS chính/DNS thứ hai - (Optional) Enter one or two DNS addresses in dotted-decimal notation provided by your ISP. If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option. And you should enter the following parameters (Figure 4-7): Figure 4-7 WAN - PPPoE Tên đăng nhập/Mật mã...
  • Page 35 TL-WR740N 150Mbps Wireless N Router attempt to access the Internet again. If you want your Internet connection keeps active all the time, please enter “0” in the Thời gian nghỉ tối đa field. Otherwise, enter the number of minutes you want to have elapsed before your Internet access disconnects.
  • Page 36 TL-WR740N 150Mbps Wireless N Router which should not be configured unless you are sure it is necessary for your ISP. In most cases, leaving these fields blank will work. Địa chỉ IP được chỉ định bởi nhà cung cấp dịch vụ Internet - If your ISP does not automatically assign IP addresses to the Router during login, please click “Địa chỉ...
  • Page 37 TL-WR740N 150Mbps Wireless N Router Domain Auth - Type in the domain suffix server name based on your location. e.g. NSW / ACT - nsw.bigpond.net.au VIC / TAS / WA / SA / NT - vic.bigpond.net.au QLD - qld.bigpond.net.au Kích thước MTU (đơn vị byte) - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes.
  • Page 38 TL-WR740N 150Mbps Wireless N Router Figure 4-10 WAN –L2TP Tên đăng nhập/Mật mã - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. IP Động/ IP Tĩnh - Choose either as you are given by your ISP. Click the Kết nối button to connect immediately.
  • Page 39 TL-WR740N 150Mbps Wireless N Router After a specified period of inactivity (Thời gian nghỉ tối đa), the Router will disconnect from your Internet connection, and you will not be able to re-establish your connection automatically as soon as you attempt to access the Internet again. To use this option, click the radio button.
  • Page 40 TL-WR740N 150Mbps Wireless N Router If you choose static IP and enter the domain name, you should also enter the DNS assigned by your ISP. And click the Lưu button. Click the Kết nối button to connect immediately. Click the Ngắt kết nối button to disconnect immediately.

  • Page 41: Lan

    TL-WR740N 150Mbps Wireless N Router 4.5.2 Choose menu “Mạng→LAN”, and then you can configure the IP parameters of the LAN on the screen as below. Figure 4-12 LAN Địa chỉ MAC - The physical address of the Router, as seen from the LAN. The value can't be changed.

  • Page 42: Không Dây

    TL-WR740N 150Mbps Wireless N Router Địa chỉ MAC máy tính của bạn - This field displays the MAC address of the PC that is managing the Router. If the MAC address is required, you can click the Sao địa chỉ MAC đến button and this MAC address will fill in the Địa chỉ...
  • Page 43 TL-WR740N 150Mbps Wireless N Router Figure 4-15 Wireless Settings Tên mạng không dây(Còn được gọi là SSID) - Enter a value of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network.
  • Page 44 TL-WR740N 150Mbps Wireless N Router Chế độ- Select the desired mode. The default setting is 11bgn mixed. Chỉ 11b - Select if all of your wireless clients are 802.11b. Chỉ 11g - Select if all of your wireless clients are 802.11g.

  • Page 45: Bảo Mật Không Dây

    TL-WR740N 150Mbps Wireless N Router Khảo sát - Click this button, you can search the AP which runs in the current channel. • Dạng mã - This option should be chosen according to the AP's security configuration. It • is recommended that the security type is the same as your AP's security type Chỉ...
  • Page 46 TL-WR740N 150Mbps Wireless N Router it’s strongly recommended to choose one of the following modes to enable security. WEP - It is based on the IEEE 802.11 standard. If you select this check box, you will find a notice in red as show in Figure 4-17 .
  • Page 47 TL-WR740N 150Mbps Wireless N Router Note: If you check the WPA/WPA2 radio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-18 Figure 4-18 • IP Server Radius - Enter the IP address of the Radius Server.

  • Page 48: Lọc Địa Chỉ Mac Không Dây

    TL-WR740N 150Mbps Wireless N Router • Thời gian cập nhật mã nhóm- Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update. Be sure to click the Lưu button to save your settings on this page.
  • Page 49 TL-WR740N 150Mbps Wireless N Router Enter a simple description of the wireless station in the Mô tả field. For example: Wireless station A. Trạng thái - Select Đã kích hoạt or Đã vô hiệu hóa for this entry on the Trạng thái drop-down list.

  • Page 50: Không Dây Nâng Cao

    TL-WR740N 150Mbps Wireless N Router 4.6.4 Không dây nâng cao Choose menu “Không dây →Không dây nâng cao”, and then you can configure the advanced settings of your wireless network. Figure 4-22 Wireless Advanced Công suất truyền tải - Here you can specify the transmit power of Router. You can select High, Middle or Low which you would like.

  • Page 51: Thống Kê Không Dây

    TL-WR740N 150Mbps Wireless N Router next window for listening to broadcast and multicast messages. When the Router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon Intervals.

  • Page 52: Dhcp

    TL-WR740N 150Mbps Wireless N Router If the numbers of connected wireless stations go beyond one page, click the Tiếp button to go to the next page and click the Trước button to return to the previous page. Note: This page will be refreshed automatically every 5 seconds.

  • Page 53: Danh Sách Máy Khách Dhcp

    TL-WR740N 150Mbps Wireless N Router IP addresses. 192.168.0.100 is the default start address. Địa chỉ IP kết thúc - Specify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.0.199 is the default end address.

  • Page 54: Dành Riêng Địa Chỉ

    TL-WR740N 150Mbps Wireless N Router You cannot change any of the values on this page. To update this page and to show the current attached devices, click the Làm mới button. 4.7.3 Dành riêng địa chỉ Choose menu “DHCP→Dành riêng địa chỉ”, and then you can view and add a reserved address for clients via the next screen (shown in Figure 4-27 ).

  • Page 55: Đang Chuyển Tiếp

    TL-WR740N 150Mbps Wireless N Router Click the Lưu button. Click the Kích hoạt tất cả/ Vô hiệu hóa tất cả button to make all entries enabled/disabled Click the Xóa tất cả button to delete all entries Click the Tiếp button to go to the next page and Click the Trước button to return to the previous page.
  • Page 56 TL-WR740N 150Mbps Wireless N Router specific port number when Cổng kích hoạt is a single one. Địa chỉ IP - The IP address of the PC running the service application. Giao thức - The protocol used for this application, either TCP, UDP, or Tất cả (all protocols supported by the Router).

  • Page 57: Cổng Kích Hoạt

    TL-WR740N 150Mbps Wireless N Router Click the Xóa tất cả button to delete all entries. Click the Tiếp button to go to the next page and click the Trước button to return to the previous page. Note: If you set the service port of the virtual server as 80, you must set the Web management port on Công cụ...
  • Page 58 TL-WR740N 150Mbps Wireless N Router Figure 4-33 Add or Modify a Triggering Entry Cồng kích hoạt - The port for outgoing traffic. An outgoing connection using this port will trigger this rule. Giao thức kích hoạt - The protocol used for Trigger Ports, either TCP, UDP, or Tất cả (all protocols supported by the Router).

  • Page 59: Dmz

    TL-WR740N 150Mbps Wireless N Router entry in the Cổng kích hoạt table, and associates them with the local host. When necessary, the external host will be able to connect to the local host using one of the ports defined in the Cổng vào field.

  • Page 60: Bảo Mật

    TL-WR740N 150Mbps Wireless N Router Figure 4-35 UPnP Setting Trạng thái UPnP hiện tại - UPnP can be enabled or disabled by clicking the Kích hoạt or Vô hiệu hóa button. This feature is enabled by default. Danh sách cài đặt UPnP hiện tại - This table displays the current UPnP information.

  • Page 61: Bảo Mật Cơ Bản

    TL-WR740N 150Mbps Wireless N Router 4.9.1 Bảo mật cơ bản Choose menu “Bảo mật → Bảo mật cơ bản”, and then you can configure the basic security in the screen as shown in Figure 4-37. Figure 4-37 Basic Security Tường lửa - A firewall protects your network from the outside world. Here you can enable or disable the Router’s firewall.

  • Page 62: Bảo Mật Nâng Cao

    TL-WR740N 150Mbps Wireless N Router the use of cryptographic security services. To allow IPSec tunnels to pass through the Router, click Kích hoạt. ALG - It is recommended to enable Application Layer Gateway (ALG) because ALG allows customized Network Address Translation (NAT) traversal filters to be plugged into the gateway to support address and port translation for certain application layer "control/data"...

  • Page 63: Quản Lý Nội Bộ

    TL-WR740N 150Mbps Wireless N Router Khoảng thời gian thống kê các gói tin (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop-down list. The Packets Statistics Interval value indicates the time section of the packets statistics. The result of the statistics is used for analysis by SYN Flood, UDP Flood and ICMP-Flood.

  • Page 64: Quản Lý Từ Xa

    TL-WR740N 150Mbps Wireless N Router Figure 4-39 Local Management By default, the radio button “Tất cả các máy tính trong mạng LAN được phép truy cập tiện ích web của Router” is checked. If you want to allow PCs with specific MAC Addresses to access the Setup page of the Router's Web-Based Utility locally from inside the network, check the radio button “...

  • Page 65: Quyền Kiểm Soát Của Phụ Huynh

    TL-WR740N 150Mbps Wireless N Router Cổng quản lý web - Web browser access normally uses the standard HTTP service port 80. This Router's default remote management web port number is 80. For greater security, you can change the remote management web port to a custom port by entering that number in the box provided.
  • Page 66 TL-WR740N 150Mbps Wireless N Router Figure 4-42 Add or Modify Parental Control Entry Quyền kiểm soát của phụ huynh - Check Kích hoạt if you want this function to take effect; otherwise, check Vô hiệu hóa. Địa chỉ MAC của máy tính phụ huynh - In this field, enter the MAC address of the controlling PC, or you can make use of the Sao chép lên trên button below.
  • Page 67 TL-WR740N 150Mbps Wireless N Router Select from the Effective Time drop-down list the schedule (e.g. Schedule_1) you want. If there are not suitable schedules for you, click the Thời gian biểu in red below to go to the Advance Schedule Settings page and create the schedule you need.

  • Page 68: Kiểm Soát Truy Cập

    TL-WR740N 150Mbps Wireless N Router 4.11 Kiểm soát truy cập Figure 4-44 Access Control There are four submenus under the Access Control menu as shown in Figure 4-44: Điều luật, Máy chủ, Đích đến and Thời gian biểu. Click any of them, and you will be able to configure the corresponding function.
  • Page 69 TL-WR740N 150Mbps Wireless N Router Kích hoạt - Here displays the status of the rule, enabled or not. Check this option to enable a specific entry. Tùy chỉnh - Here you can edit or delete an existing rule. Cài đặt theo hướng dẫn - Click the Cài đặt theo hướng dẫn button to create a new rule entry.
  • Page 70 TL-WR740N 150Mbps Wireless N Router Địa chỉ MAC - Enter the MAC address of the host in XX-XX-XX-XX-XX-XX format (e.g. 00-11-22-33-44-AA). Click Tiếp when finishing creating the host entry, and the next screen will appear as shown in Figure 4-47.
  • Page 71 TL-WR740N 150Mbps Wireless N Router Click Tiếp when finishing creating the access target entry, and the next screen will appear as shown in Figure 4-48. Figure 4-48 Quick Setup – Create an Advanced Schedule Entry Mô tả thời gian biểu - In this field, create a description for the schedule. Note that this description should be unique (e.g.
  • Page 72 TL-WR740N 150Mbps Wireless N Router Máy chủ - In this field, select a host from the drop-down list for the rule. The default value is the Mô tả máy chủ you set just now. Đích - In this filed, select a target from the drop-down list for the rule. The default value is the Mô...

  • Page 73: Máy Chủ

    TL-WR740N 150Mbps Wireless N Router We recommend that you click Cài đặt theo hướng dẫn button to finish all the following settings. Click the submenu Máy chủ of Kiểm soát truy cập in the left to enter the Host List page.
  • Page 74 TL-WR740N 150Mbps Wireless N Router Click the Thêm mới… button. In the Chế độ field, select Địa chỉ IP or Địa chỉ MAC. If you select Địa chỉ IP, the screen shown is Figure 4-52. 1) In Mô tả máy chủ field, create a unique description for the host (e.g. Host_1).

  • Page 75: Đích Đến

    TL-WR740N 150Mbps Wireless N Router 4.11.3 Đích đến Choose menu “Kiểm soát truy cập → Đích đến”, and then you can view and set a Target list in the screen as shown in Figure 4-54. The target list is necessary for the Access Control Rule.

  • Page 76: Thời Gian Biểu

    TL-WR740N 150Mbps Wireless N Router Figure 4-56 Add or Modify an Access Target Entry 1) In Mô tả đích đến field, create a unique description for the target (e.g. Target_1). 2) In Tên miền field, enter the domain name, either the full name or the keywords (for example, google) in the blank.
  • Page 77 TL-WR740N 150Mbps Wireless N Router Figure 4-57 Schedule Settings Mô tả Thời gian biểu - Here displays the description of the schedule and this description is unique. Ngày - Here displays the day(s) in a week. Giờ - Here displays the time period in a day.

  • Page 78: Định Tuyến Nâng Cao

    TL-WR740N 150Mbps Wireless N Router For example: If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18:00 to 20:00 on Saturday and Sunday, you should first follow the settings below: 1) Click Thêm mới...

  • Page 79: Bảng Định Tuyến Hệ Thống

    TL-WR740N 150Mbps Wireless N Router Figure 4-61 Add or Modify a Static Route Entry Enter the following data: Mạng đích - The Destination Network is the address of the network or host that you want to assign to a static route.

  • Page 80: Kiểm Soát Băng Thông

    TL-WR740N 150Mbps Wireless N Router Figure 4-62 System Routing Table Mạng đích - The Destination Network is the address of the network or host to which the static route is assigned. Subnet Mask - The Subnet Mask determines which portion of an IP address is the network portion, and which portion is the host portion.

  • Page 81: Danh Sách Điều Luật

    TL-WR740N 150Mbps Wireless N Router Figure 4-64 Bandwidth Control Settings Kích hoạt Kiểm soát băng thông - Check this box so that the Bandwidth Control settings can take effect. Dạng dây - Select the right type for you network connection. If you don’t know how to choose, please ask your ISP for the information.

  • Page 82: Kết Hợp Ip & Mac

    TL-WR740N 150Mbps Wireless N Router Figure 4-66 Bandwidth Control Rule Settings Click the Lưu button. 4.14 Kết hợp IP & MAC Figure 4-67 the IP & MAC Binding menu There are two submenus under the Kết hợp IP & MAC menu (shown in Figure 4-67): Cài đặt liên kết and Danh sách ARP.
  • Page 83 TL-WR740N 150Mbps Wireless N Router Tùy chỉnh - To modify or delete an existing entry. When you want to add or modify an IP & MAC Binding entry, you can click the Thêm mới… button or Tùy chỉnh button, and then you will go to the next page. This page is used for adding or modifying an IP &...

  • Page 84: Danh Sách Arp

    TL-WR740N 150Mbps Wireless N Router 4.14.2 Danh sách ARP To manage the computer, you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, and you could also configure the items on the ARP list.

  • Page 85: Comexe.cn Ddns

    TL-WR740N 150Mbps Wireless N Router 4.15.1 Comexe.cn DDNS If the dynamic DNS Service Provider you select is www.comexe.cn, the page will appear as shown in Figure 4-72. Figure 4-72 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: Enter the Tên miền your dynamic DNS service provider gave.

  • Page 86: No-Ip.com Ddns

    TL-WR740N 150Mbps Wireless N Router Figure 4-73 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: Enter the Tên đăng nhập for your DDNS account. Enter the Mật mã for your DDNS account. Enter the Tên miền you received from dynamic DNS service provider.
  • Page 87 TL-WR740N 150Mbps Wireless N Router Figure 4-74 No-ip.com DDNS Settings To set up for DDNS, follow these instructions: Enter the Tên đăng nhập for your DDNS account. Enter the Mật mã for your DDNS account. Enter the Tên miền you received from dynamic DNS service provider.

  • Page 88: Công Cụ Hệ Thống

    TL-WR740N 150Mbps Wireless N Router 4.16 Công cụ hệ thống Figure 4-75 The System Tools menu Choose menu “Công cụ hệ thống”, and you can see the submenus under the main menu: Cài đặt thời gian, Công cụ chẩn đoán, Nâng cấp Firmware, Cài đặt gốc, Sao lưu & Phục hồi, Khởi động lại, Mật mã, Bản ghi hệ...
  • Page 89 TL-WR740N 150Mbps Wireless N Router Múi giờ- Select your local time zone from this pull down list. Ngày - Enter your local date in MM/DD/YY into the right blanks. Giờ - Enter your local time in HH/MM/SS into the right blanks.

  • Page 90: Công Cụ Chẩn Đoán

    TL-WR740N 150Mbps Wireless N Router Note: This setting will be used for some time-based functions such as firewall. You must specify your time zone once you login to the router successfully, otherwise, these functions will not take effect. The time will be lost if the router is turned off.

  • Page 91: Nâng Cấp Firmware

    TL-WR740N 150Mbps Wireless N Router wish to diagnose. Đếm Ping - Specifies the number of Echo Request messages sent. The default is 4. Kích thước gói Ping - Specifies the number of data bytes to be sent. The default is 64.

  • Page 92: Cài Đặt Gốc

    The Router will reboot while the upgrading has been finished. Note: 1) New firmware versions are posted at http://www.tp-link.vn and can be downloaded for free. There is no need to upgrade the firmware unless the new firmware has a new feature you want to use.

  • Page 93: Sao Lưu & Phục Hồi

    TL-WR740N 150Mbps Wireless N Router Note: All changed settings will be lost when defaults are restored. 4.16.5 Sao lưu & Phục hồi Choose menu “Công cụ hệ thống → Sao lưu & Phục hồi”, and then you can save the current configuration of the Router as a backup file and restore the configuration via a backup file as shown in Figure 4-82.

  • Page 94: Mật Mã

    TL-WR740N 150Mbps Wireless N Router • Change the Wireless configurations. • Change the Web Management Port. • Upgrade the firmware of the Router (system will reboot automatically). • Restore the Router's settings to factory defaults (system will reboot automatically). •...
  • Page 95 TL-WR740N 150Mbps Wireless N Router Figure 4-85 System Log Chức năng thự tự động - Indicates whether auto mail feature is enabled or not. Cài đặt thư - Set the receiving and sending mailbox address, server address, validation information as well as the timetable for Auto Mail Feature, as shown in Figure 4-86.

  • Page 96: Thống Kê

    TL-WR740N 150Mbps Wireless N Router You can log on the relevant website for help if you are not clear with the address. • Xác thực - Most SMTP Server requires Authentication. It is required by most mailboxes that need User Name and Password to log in.
  • Page 97 TL-WR740N 150Mbps Wireless N Router Figure 4-87 Statistics Trạng thái thống kê hiện tại - Enable or Disable. The default value is disabled. To enable it, click the Kích hoạt button. If it is disabled, the function of DoS protection in Security settings will be disabled.
  • Page 98 TL-WR740N 150Mbps Wireless N Router Bảng thống kê: Địa chỉ IP/MAC The IP and MAC address are displayed with related statistics. Gói tin The total number of packets received and transmitted by the Router. Tổng The total number of bytes received and transmitted by the Router.

  • Page 99: Appendix A: Faq

    TL-WR740N 150Mbps Wireless N Router Appendix A: FAQ How do I configure the Router to access Internet by ADSL users? First, configure the ADSL Modem configured in RFC1483 bridge model. Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router. The telephone cord plugs into the Line port of the ADSL Modem.
  • Page 100 TL-WR740N 150Mbps Wireless N Router How do I configure the Router to access Internet by Ethernet users? Login to the Router, click the “Mạng” menu on the left of your browser, and click "WAN" submenu. On the WAN page, select “IP Động” for "Dạng kết nối WAN", finish by clicking “Lưu”.
  • Page 101 TL-WR740N 150Mbps Wireless N Router Figure A-5 Add or Modify a Virtual server Entry Note: Your opposite side should call your WAN IP, which is displayed on the “Trạng thái” page. How to enable DMZ Host: Log in to the Router, click the “Đang chuyển tiếp” menu on the left of your browser, and click "DMZ"...
  • Page 102 TL-WR740N 150Mbps Wireless N Router Figure A-7 Basic Security I want to build a WEB Server on the LAN, what should I do? Because the WEB Server port 80 will interfere with the WEB management port 80 on the Router, you must change the WEB management port number to avoid interference.
  • Page 103 TL-WR740N 150Mbps Wireless N Router the “Thêm hoặc tùy chỉnh một mục Server ảo” page, enter “80” into the blank next to the “Cổng dịch vụ”, and your IP address next to the “Địa chỉ IP”, assuming 192.168.0.169 for an example, remember to Kích hoạt and Lưu.

  • Page 104: Appendix B: Configuring The Pcs

    TL-WR740N 150Mbps Wireless N Router Appendix B: Configuring the PCs In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if needed.
  • Page 105 TL-WR740N 150Mbps Wireless N Router In the prompt page that showed below, double click on the Internet Protocol (TCP/IP). Figure B-2 The following TCP/IP Properties window will display and the IP Address tab is open on this window by default.
  • Page 106 TL-WR740N 150Mbps Wireless N Router Select Obtain an IP address automatically and Obtain DNS server automatically, as shown in the Figure below: Figure B-3 -99-...

  • Page 107: Appendix C: Specifications

    TL-WR740N 150Mbps Wireless N Router Appendix C: Specifications General IEEE 802.3, IEEE 802.3u, IEEE802.11n, IEEE802.11b, IEEE Standards 802.11g Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP One 10/100M Auto-Negotiation WAN RJ45 port, Four 10/100M Ports Auto-Negotiation LAN RJ45 ports supporting Auto MDI/MDIX 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω...

  • Page 108: Appendix D: Glossary

    TL-WR740N 150Mbps Wireless N Router Appendix D: Glossary 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing and increased range by exploiting the spatial diversity, perhaps through coding schemes like Alamouti coding.
  • Page 109 TL-WR740N 150Mbps Wireless N Router identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID. This is typically the configuration parameter for a wireless PC card. It corresponds to the ESSID in the wireless Access Point and to the wireless network name.

Table of Contents