Standard Memory Operation - Yaesu FT-991 Operating Manual

M o
eMorY
The Standard Memory of the FT-991 allows storage and recall of up to 99 memories, each storing frequency, mode,
and a wide variety of status information, detailed previously. Memories may be grouped into as many as six Memory
Groups, and additionally you get nine pairs of band-limit (PMS) memories along with five QMB (Quick Memory Bank)
memories.
Memory Storage
1. Set VFO-A up with the frequency, mode, and status,
the way you want to have it stored.
2. Press the A M button momentarily; the current

channel number will start blinking in the display and
the "MCK" notation will appear.
3. Rotate the MULTI knob to select the memory chan-
nel that you wish to store the data on.
4. Press and hold in the A
store the frequency and other data into the selected
memory channel. A double beep will confirm that
you have held the A M button in long enough.

Memory Channel Recall
1. Press the V/M button, if necessary, to enter the
"Memory mode".
2. Press the F(M-LIST) button, then touch [ MCH ] on
the LCD. A memory channel number and the "MCH"
notation will appear in the display.
3. After touching [ MCH ] on the LCD, you may rotate
the MULTI knob to select the desired memory chan-
nel.
A :
dvice
To work within a particular Memory Group, press the
F(M-LIST) button, then touch [ GRP ] on the LCD.
Rotate the MULTI knob to select the desired Memory
Group, then touch [ ENTER ] on the LCD (the "MCH"
notation will appear instead of the "GRP"); you may
now choose the memory channel within the selected
Memory Group.
Page 76
peraTion
S M
tAndArd
M button for one second to

o
eMory perAtion
FT-991 O
MULTI Knob A M Button

F(M-LIST ) Button
MULTI Knob V/M Button
M
peraTing anual