Standard Memory Operation - Yaesu FT-991A Operating Manual

Memory Operation
The Standard Memory of the FT-991A allows storage and recall of up to 99 memories, each storing frequency, mode,
and a wide variety of status information, detailed previously. Memories may be grouped into as many as six Memory
Groups. Additionally there are nine pairs of band-limit ( PMS ) memories along with five QMB ( Quick Memory Bank )
memories.
Memory Storage
1. Set VFO-A up with the frequency, mode, and status,
the way you want to have it stored.
2. Press the A M button momentarily; the current

channel number will appear in the display and the
"MCK" notation will appear.
3. Rotate the MULTI knob to select the memory chan-
nel that you wish to store the data on.
4. Press and hold in the A
store the frequency and other data into the selected
memory channel. A double beep will sound to con-
firm that the operation is completed.
Memory Channel Recall
1. Press the V/M button, if necessary, to enter the
"Memory mode".
2. Press the F ( M-LIST ) button, then touch [ MCH ] on
the LCD. A memory channel number and the "MCH"
notation will appear in the display.
3. Touch [ MCH ] on the LCD, and then rotate the
MULTI knob to select the desired memory channel.
Page 104

Standard Memory Operation

M button for one second to

MULTI Knob
F ( M-LIST ) Button
MULTI Knob
Advice:
To work within a particular Memory Group, press the
F ( M-LIST ) button, then touch [ GRP ] on the LCD.
Rotate the MULTI knob to select the desired Memory
Group, then touch [ MCH ] on the LCD ( the "MCH"
notation will appear instead of the "GRP" ) ; Now the
memory channel may be chosen from within the select-
ed Memory Group.
FT- 991 Operating Manual
A M Button

V/M Button