Logreceiver - D-Link NetDefend DFL-210 Cli Reference Manual

3.28. LogReceiver

3.28. LogReceiver
This is a category that groups the following object types.
3.28.1. LogReceiverMemory
Description
A memory log receiver is used to receive and keep log events in system RAM.
Properties
Name
LogSeverity
Comments
3.28.2. LogReceiverSMTP
Description
An SMTP event receiver is used for receiving e-mails for IDP events.
Properties
Name
IPAddress
Port
Receiver1
Receiver2
Receiver3
Sender
Identity
XMailer
Subject
HoldTime
MinRepeatDelay
Specifies a symbolic name for the log receiver. (Identifier)
Specifies with what severity log events will be sent to the specified log receiv-
ers. (Optional; Default: Emergency,Alert,Critical,Error,Warning,Notice,Info)
Text describing the current object. (Optional)
Specifies a symbolic name for the log receiver. (Identifier)
The IP address of the SMTP server.
Specifies the which port to use to connect to the SMTP server. (Default:
25)
The E-mail address that the event information is sent to.
Alternate e-mail receiver. (Optional)
Alternate e-mail receiver. (Optional)
Specifies which sender the E-mail will have. (Default: hostmaster)
Specifies which identity to write in the E-mail header. (Default: hostmas-
ter)
Specifies the X-mailer information to write in the E-mail header.
(Optional)
The subject of the E-mail. (Default: "Log event from D-Link DFL Fire-
wall")
The hold time in seconds during which the log threshold must be reached
for an E-mail to be sent. (Default: 120)
The amount of seconds the security gateway will wait before sending an-
103
Chapter 3. Configuration Reference