Voice Index; Acdrive Firmware Version Display; Unique Id Display; Audio Preset Memory - Kenwood eXcelon KDC-X789 Instruction Manual

Kenwood cd-receiver instruction manual
Hide thumbs Also See for eXcelon KDC-X789:
Table of Contents

Advertisement

Function of the KDC-X889/KDC-MP828/KDC-X789
Function of ACDrive disc

Voice Index

Setting the announcement during the play of AC
Drive disc.
Display
Setting
"Voice Index : ON"
Guide is announced.
"Voice Index : OFF"
Not be announced.
Function of the KDC-X889/KDC-MP828/KDC-X789
In CD mode

ACDrive firmware version display

Displaying the firmware version with the ACDrive
function.
1
Select the firmware version display mode
Push the Control knob to [FM] or [AM].
Select the "ACD F/W Version" display.
2
Display the ACDrive firmware version
Push the Control knob to [4] or [¢].
Function of the KDC-X889/KDC-MP828/KDC-X789
In CD mode

Unique ID display

Displaying the serial number for each product.
1
Select the unique ID display mode
Push the Control knob to [FM] or [AM].
Select the "ACD Unique ID" display.
2
Display the unique ID
Push the Control knob to [4] or [¢].
Function of the KDC-MP7028/KDC-MP728/KDC-
X789/KDC-MP628
Other than Standby mode

Audio Preset Memory

Registering the value setup by Sound Control. The
memory can't be erased by the Reset button.
1
Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 10)
- <Audio Setup> (page 12)
- <Equalizer Control> (page 16)
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
3
Select Audio Preset mode
Push the Control knob to [FM] or [AM].
Select the "Audio Preset" display.
4
Enter Audio Preset mode
Press the Control knob for at least 1 second.
5
Select the Audio Preset Memory
Push the Contol knob to [FM] or [AM].
Select the "Memory" display.
6
Put the Audio Preset in the memory
Press the Control knob for at lea st 2 seconds.
The "Memory" display blinks 1 time.
7
Exit Menu mode
Press the [MENU] button.
• Register 1 pair of Audio Preset Memory. You can't
register by the source.
• When you press the Reset, all the sources will be the
setting value which is registered.
• The following items can't be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume
49
|
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-mp628Kdc-mp7028Kdc-mp728Kdc-mp828Kdc-x889

Table of Contents