Voice Index; Firmware Version Display; Unique 10 Display; Audio Preset Memory - Kenwood KDC-MP632U - USB/AAC/WMA/MP3/CD Receiver With External Media Control Instruction Manual

Function
of
the KDC-X590IKDC-MP632U
Function
of
ACDrive media
Voice Index
Function
of
the KDC-X590/KDC-MP632U
Other than Standby mode
Audio Preset Memory
Setting the announcement during the play of
ACDrive media.
Registering the value setup by Sound Control. The
memory cannot be erased by the Reset button.
Displaying the serial number for each product.
Displaying the firmware version with the unit.
In COl USB mode
Firmware version display
Function of the KDC-X590IKDC-MP632U
In COl USB mode
Unique ID display
• Register 1 pair of Audio Preset Memory. You cannot
register by the source.
• When you press the Reset, all the sources will be the
setting value which is registered.
• The following items cannot be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume
1
Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 12)
- <Audio Setup> (page 14)
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Audio Preset mode
Push the Control knob towards [FM] or [AM].
Select the "A-PRESET' display.
4
Enter Audio Preset mode
Press the Control knob for at least 1 second.
S
Select the Audio Preset Memory
Push the Control knob towards [FM] or [AM].
Select the "MEMORY" display.
6
Put the Audio Preset in the memory
Press the Control knob for at least 2 seconds.
The "MEMORy
n
display blinks 1 time.
7
Exit Audio Preset mode
Press the [MENU] button.
~
Not be announced.
Guide is announced.
"V-ID OFF"
"V-ID ON"
1
Select the firmware version display mode
Push the Control knob towards [FM] or [AM].
Select the "ACD VER"/"F/W VEW display.
2
Display the firmware version
Push the Control knob towards
[~]
or
[~].
1
Select the unique 10 display mode
Push the Control knob towards [FM] or [AM].
Select the "ACD 10" display.
2
Display the unique 10
Push the Control knob towards
[~]
or
[~].
English
I
33