Table of Contents
Advertisement
Program 17-nn : Forced Account Code
17-nn FCAC CODE
__________
dd
General:
This program creates 99 Forced Account codes.
Description:
The forced account code will temporarily override a station's toll restrictions.
99 codes of up to 8 digits maximum are allowed. If the system is fitted with a call accounting output the entry for
a call made using a forced account code will display the code used in the account code column. The actual
numbers of the code will not be displayed for security reasons, the reading will show FAC:XX. XX is the forced
account code number 01 to 99.
The Forced Account Code will not be displayed on the screen of Executive phones when it is entered.
Digit "d" is keyed in by {Don't care} button and means " Any digit " ("don't care").
Digit "_" is keyed in by [TRF/FL] button and means " No digit ".
Clear all digits by pressing [TRF/FL] to insert a line in place of the original entry.
The last two digits dd are for toll class selection – Day and Night. The forced account code will open the call from
the stations normal class to the Class set for Day and Night.
First d: for Day time Toll Class.
Second d : for Night time Toll Class.
Do not use Redial to clear forced account code entries as this will insert "don't care" which will allow any digit as
a forced account code.
Forced Account codes are also used by the ACP (Digital Door Phone) to unlock the door relay of the ACP or
system.
The Forced Account Codes may also be used as DISA passwords to allow call accounting to show which user
was making an external call using DISA from outside the system. Forced Account Codes 50 to 99 can be used
for this purpose. This feature will need to be enabled in Mode 05-11-02.
124
nn = Forced Account Code (01-99)
Forced account code (8 digits max.) Day level-Night Level
Issue 3.3.2 / April, 2011
Advertisement
Table of Contents
