Related Manuals for HYBREX GDS-600
Summary of Contents for HYBREX GDS-600
- Page 1 The Friendly HYBRid Exchange GDS- Digital Telephone System ISDN Digital Telephone System G2-VMU Guide & Voicemail Installation...
- Page 2 Notification Notification is hereby given that Auto Telecom Company Ltd. reserves the right to modify, change, update or revise this document from time to time as required without the prior obligation to notify any person, company or organization. Further, Auto Telecom makes no warranty or representation, either express or implied, with respect to merchantability, or fitness of its products for a particular purpose.
- Page 3 Hardware Installation for the G2-VMU The G2-VMU can currently be fitted with either a 32Mb or a 64Mb Flash Ram card. Make sure that a card is installed and that it is correctly pushed home before installing the G2-VMU. Ensure that the power is turned off and plug the VMU card into the appropriate slot on the MBU. There are 2 VMU slots on the G2-MBU.
- Page 4 Features guide for the G2-VMU The G2 VMU can be fitted with either a 32Mb or a 64Mb Flash memory card. The 32 Mb card gives a capacity of 2 hours storage and the 64 Mb card gives 4 hours of storage. The Voice mail card is supplied with already recorded voice prompts for most user functions including default company greetings for Auto Attendant (DISA) and Operator Overflow (ACD-1).
- Page 5 Programming Set Up for the G2-VMU Related programming Modes. Mode 05-06-04 Reversal On Idle Mode 13-07. VMU Password Mode 25-8. VMU Initialisation Mode 41-08 Check a Stations Port number Mode 43-port-05 Allocate Recording blocks to Stations. Mode 43-port-06 Set maximum recording length for each message per Station. When the G2-VMU is installed Or the system software has been upgraded then the first step is to Initialise the VMU.
- Page 6 06 = 30 storage units are available 07 = 35 storage units are available 08 = 40 storage units are available 09 = 45 storage units are available 10 = 50 storage units are available ………. 50 = 250 storage units are available (Note: Total number of recording blocks is 250 for 32MB capacity;...
- Page 7 Recording Auto Attendant and ACD Messages on the G2-VMU Recording greeting messages On Console press [89][PASSWORD] |__ 13-07-XXXX(default=1234) [2] -- record greeting message |___ [1] To record greeting message |_ [1] to record day time greeting message |_ [2] to record lunch break time greeting message |_ [3] to record night time greeting message |_ [4] to record holiday greeting message |_ [#] to finish...
- Page 8 e. Checking the recording capacity of the VMU card. On the Console press [89][1234] [7] -- Check Mail Box Total | [0/0/12/7]=32M | [0/2/1/12]=64M...
-
Page 9: Using Voicemail
Setting up and using your personal Mailbox on the G2-VMU You must firstly record your greeting message. To do this dial 86 from your handset. If the VMS answers and says “thank you for calling” and hangs up, check in the system programming that recording blocks have been allocated to the extension.
Need help?
Do you have a question about the GDS-600 and is the answer not in the manual?
Questions and answers