Configuring Administrative Email Settings - SonicWALL CDP 6.0 Administrator's Manual

Configuring Administrative Email Settings

This section provides configuration instructions specific to the System > Mail page in the Web
Management Interface. This page allows you to configure email settings so that you can receive
alerts.
To configure email settings:
Navigate to System > Settings in the left-hand menu. Select the Mail tab.
Step 1
Provide the following SMTP information:
Step 2
•
•
•
•
•
•
Select Apply to save these settings. Click the Send Test Email button to send a test email for
Step 3
verification.
Check the email account you specified in Recipient Email Address to verify that the email was
Step 4
delivered.
Server (name or IP address): Provide the SMTP mail server or IP address. For example,
mail.mycompany.com.
Recipient Email Address: Specify the email address where the alert will be sent. For
example, administrator_1@mycompany.com.
From Email Address: Specify the email address that will appear as the sender of the
email. For example, administrator_2@mycompany.com
From Email Domain: Specify the email domain that will appear in the sender's email
address. For example, mycompany.com.
User Name (if required): Specify a user name associated with the email address you
specified in From email address, if required. For example, administrator_2.
Password (if required): Specify a password associated with the email address you
specified in From email address, if required.
Configuring the System Settings
SonicWALL CDP 6.0 Administrator's Guide 45