Calf Pads/Footplates - Invacare SpinX Manual

1.
2.
Tools: 5 mm Allen Key
3.
4.
Tools: 5 mm Allen Key
x
INVACARE ® SPIN

CALF PADS/FOOTPLATES

C
D
B
A
A
A
1. Calf pads
The calf pads can be fitted in four different depth
positions. Swing the pad forwards. Unscrew screw
(B) using an Allen key. Remove the large nut (C) on
the reverse side and place it in the other attach-
ment hole. Move the calf pad to the new position
and secure it into place with the screw.
The height of the calf pads can easily be adjusted
using the handwheel (D).
2. Depth- and angle adjustable footplates
Adjust the angle and the depth by loosening the
screw (A) at the footplate attachment with a 5
mm Allen key. Adjust the footplate to the correct
position and retighten the screw.
Do not place anything on the footplate when
the screw is loose.
3. Angle adjustable footplates
Adjust the angle by loosening the screw (A) on
the footrest tube with a 5 mm Allen key. Adjust
the footplate to the correct position and retight-
en the screw.
Do not place anything on the footplate when
the screw is loose.
4. Footrest, one piece
Adjust the angle and the depth by loosening the
two screws (A) at the footplate attachment with
a 5 mm Allen key. Adjust the footplate to the
correct position and retighten the screws.
Do not place anything on the footplate when
the screws are loose.
The footrest can be flipped up. Lift the left side of
the footrest upwards.
Be careful not to trap your fingers between
the footrest and the reciever when folding it
down.
11