Table of Contents
Advertisement
Always lift the wheelchair by gripping
the frame at the points shown in the
diagram. Never lift the wheelchair by
the removable armrests or the foot-
rests. Ensure that the backrest and push
handles are securely in place. Also read
the chapter Safety instructions/Propel-
ling techniques.
4
NB!
This symbol means warning.
On this page a number of points affecting your personal safety are
shown. Please Read it carefully!
Invacare
is only responsible for product changes carried out by per-
®
sonnel who we authorise. We reserve the right to make any changes
to equipment and specifications without prior notice.
Failure to comply with instructions given may result in personal injury
and/or product damage.
•
Check each of the following before using the wheelchair:
- that all parts are attached securely to the frame
- that all wheels and knobs are properly tightened
- that all brakes and anti-tip devices function correctly
•
Never lift the wheelchair by the detachable armrests, footrests,
backrest stay or by the adjustable push handles.
•
Always apply the brake before getting into or out of the chair.
•
Never stand on the footplates when getting into or out of the chair,
because of the risk of tipping.
•
Changing the seat angle always gives an increased risk of tipping
over.
•
The handrims may become hot due to friction, and this may cause
injury to your hands.
•
Use extensively the anti-tip device
•
Remember that the effectiveness of the carer-operated brake
is reduced in wet and slippery conditions, as well as when on a
slope.
•
Be careful to ensure that the drive wheels are securely attached.
•
Drive wheels are not to be detached while the user is sitting in the
chair.
•
The more the backrest cover's Velcro straps are slackened the
greater the risk of tipping the wheelchair becomes.
•
Surfaces of the wheelchair like frame parts or upholstery can with
long time exposure to sun reach temperatures over 41 °C.
LIFTING THE WHEELCHAIR
x
INVACARE
SPIN
®
Advertisement
Table of Contents
