Table of Contents
Advertisement
1.
A
2a.
2b.
3.
Alt. 1
4.
x
INVACARE
®
SPIN
Transport
B
B
C
Alt. 2
When you are transporting the Invacare
can easily remove certain parts to make the chair
smaller and lighter.
1. Start by removing the armrests.
Flip up armrests
Press the button (A), swing up the armrest.
Lift it straight up. You may need to hold it slightly
forward then lift it straight up (B).
Detachable armrests
When you have detachable armrests, just lift them
up.
2a. Remove the fixed legrests by pressing the level (B),
whilst turning the footrests outwards or inwards
and pull them straight up.
2b. Remove the adjustable legrests by pressing the
level (C) backwards, whilst turning the legrests
outwards and pull them straight up.
Be careful not to trap your fingers between
frame and legrest.
3. Folding the chair
Alternative 1:
If you have a backrest bar first detach the left hand
side of the backrest stay by depressing the catch on
the inside of the left hand bracket and then rotate
the stay downwards. Fold the chair by pulling the
seat upwards.
Alternative 2:
After removing the wheels, flip down the backrest
by grabbing the wire at the lower back of the
backrest and twisting it to release the backrest
locking.
Please be careful when folding the backrest
forward onto the seat as there is a risk of
finger entrapment.
4. Remove the rearwheels by pressing the button in
the centre of the hub whilst pulling the wheel away
from the wheelchair.
Spin
you
®
x
27
Advertisement
Table of Contents
