Invacare SpinX Manual page 15

3°
6°
9°
12°
0°
1.
b.
2.
b.
3.
d.
4.
b.
x
INVACARE ® SPIN
BACKREST RECLINE
A.
a.
c.
a.
Tools: 5 mm Allen key
When the Spin x is equipped with a foldable backrest,
the backrest angle can be adjusted in angles from 0 °
to ±12° (pic. A).
Angle adjustment
1. Loosen the screw (a) using an 5 mm Allen key.
2. Remove the screw (a) and nut (b).
3. The backrest tube can now be angled forward
or backward. Place the upper tube (c) in the
desired angle and make sure that one of the angle
holes (A) is visible through the hole in the lower
tube (d).
4. To lock the backrest tube, first place the nut (b) in
it's slot on the lower tube, then attach the screw
(a) and tighten. Make sure that the backrest is still
foldable.
Note that when the backrest is angled back-
wards, it also increases the risk of tipping
the chair backwards. Adjust the rear wheels
to a stable position. We recommend the use
of anti-tip devices.
Make sure that the backrest is safely secured.
15