Table of Contents
Advertisement
The LTM-4x4HDSDI, which is housed in a 19" 1U rack mountable
enclosure, and is fed from a 100-240 VAC universal switching power supply,
can be controlled via the:
Front panel buttons
Infra-red remote control transmitter
Remotely, by RS-232 or RS-485 serial commands transmitted by a
touch screen system, PC, or other serial controller
ETHERNET
Remote contact closure for forced operation
To achieve the best performance:
Connect only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and
elevated noise levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your LTM-4x4HDSDI
away from moisture, excessive sunlight and dust
4
Your LTM-4x4HDSDI 4x4 HD-SDI / SDI Router
Figure 1, Table 1, and Table 2 define the LTM-4x4HDSDI 4x4 HD-SDI /
SDI Router.
2
Your LTM-4x4HDSDI 4x4 HD-SDI / SDI Router
Advertisement
Table of Contents
