Table of Contents
Advertisement
7.3 Storing/Recalling Input/Output Configurations
You can store and recall up to eight setup configurations using the four
INPUT buttons and the four OUTPUT buttons.
7.3.1
Storing an Input/Output Configuration
To store the current status in memory, do the following:
1. Press the STO button.
The STO button illuminates.
2. Press one of the 8 INPUT / OUTPUT buttons (this will be the setup # in
which the current status is stored).
The selected INPUT / OUTPUT button illuminates in blue. The memory
stores the data at that reference.
7.3.2
Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL button.
The RCL button illuminates.
2. Press the appropriate INPUT / OUTPUT button (the button #
corresponding to the setup #). That setup configuration will blink in the
7-segment Display.
The memory recalls the stored data from that reference.
After pressing the same memory location the second time, the settings will
take effect.
7.4 Locking the Front Panel
To prevent changing the settings accidentally or tampering with the unit via
the front panel buttons, lock
protection mechanism.
To lock the LTM-4x4HDSDI:
Press the LOCK button for three seconds, until the LOCK button is
illuminated.
The front panel is locked. Pressing a button will have no effect
To unlock the LTM-4x4HDSDI:
Press the illuminated LOCK button until the LOCK button is no
longer illuminated
The front panel unlocks
1 Nevertheless, even though the front panel is locked you can still operate via RS-232 or RS-485, as well as via the IR
Remote Control Transmitter
Operating the LTM-4x4HDSDI
1
your LTM-4x4HDSDI. Unlocking releases the
15
Advertisement
Table of Contents
