Table Of Contents - Laird LTM-4x4HDSDI User Manual

Contents
1 Introduction
2 Getting Started
3 Overview
4 Your LTM-4x4HDSDI 4x4 HD-SDI / SDI Router
5 Installing on a Rack
6 Connecting Your LTM-4x4HDSDI 4x4 HD-SDI / SDI Router
6.1 Dipswitch Settings
6.1.1 Setting the Machine # Dipswitches
6.2 Controlling via RS-232 (for example, using a PC)
6.3 Controlling via the RS-485 Port
6.4 Controlling via ETHERNET
6.4.1 Connecting the ETHERNET Port directly to a PC (Crossover Cable)
6.4.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 12
6.4.3 Control Configuration via the Ethernet Port
6.5 Controlling via the REMOTE Connector
7 Operating the LTM-4x4HDSDI
7.1 Switching OUT-IN Combinations
7.2 Confirming Settings
7.2.1 Toggling between the AT ONCE and CONFIRM Modes
7.2.2 Confirming a Switching Action
7.3 Storing/Recalling Input/Output Configurations
7.3.1 Storing an Input/Output Configuration
7.3.2 Recalling an Input/Output Configuration
7.4 Locking the Front Panel
8 Technical Specifications
9 Table of Hex Codes for Serial Communication
10 Protocol 2000
Figures
Figure 1: LTM-4x4HDSDI 4x4 HD-SDI / SDI Router
Figure 2: Connecting the LTM-4x4HDSDI 4x4 HD-SDI / SDI Router
Figure 3: LTM-4x4HDSDI SETUP Dipswitches
Figure 4: Connecting a PC without using a Null-modem Adapter
Figure 5: RJ-45 PINOUT
Figure 6: Local Area Connection Properties Window
Figure 7: Internet Protocol (TCP/IP) Properties Window
Figure 8: Using the REMOTE Connector
Contents
1
1
1
2
5
6
8
8
9
9
10
10
12
12
13
13
13
14
14
15
15
15
15
16
16
17
3
7
8
9
10
11
11
12
i