Faraday MPC-6000 Installation, Operation And Maintenance Manual page 63

MPC-6000 / MPC-7000 / RND-2 INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Either of these methods will cause the active detector to reset. Even though the 8705 latches
into alarm when the first detector on its loop activates, it will report additional alarms to the
panel as they occur, provided the last active detector is reset each time. The NACs activate for
the programmed NAC Sound Time after each detector is alarmed.
The previous detector must be clear of smoke after resetting the loop or it will
generate another alarm.
57