Troubleshooting; Frequently Asked Questions; Why Does Nothing Work?; Why Doesn’t The Engine Temperature Feature Work? - Trail Tech Vector User Manual

Frequently Asked Questions:

Why does nothing work?

• Try the reset button on the back of Vector.
• The internal battery may be dead, or Vector is not hooked up to
vehicle power properly. Review installation procedure.
Why doesn't the engine temperature feature work?
• You must have the engine temperature sensor installed correctly
for this feature to function. Review installation procedure.
• If a wire has become disconnected and plugged back in, perform
a reset by pressing <LEFT>+<CENTER> or the reset button on
the back of Vector. A data reset must be performed in order for
Vector to re-recognize the sensors if they become unplugged.
• Vector will display "- -" for engine temperature until it reaches 100ºF
(38ºC.)
Everything is working, but the (K)MPH reading is way off.
• The speed sensor/magnet may be installed incorrectly. Double
check to make sure everything is set up right. See page 14-15.
• The wheel size setting may be incorrect. Please review wheel size
measurement instructions in this manual. See page 16.
Vector is not displaying information correctly.
• If the wires on the back of Vector become damaged, incorrect
readings may be displayed.
• Avoid twisting, crimping, kinking or otherwise abusing the wires.
40

Troubleshooting