Table of Contents
Advertisement
Data Setting Mode
Overview:
Data Setting Mode is very important for Vector to operate correctly.
Available Settings:
•
Kilometers or Miles per Hour
•
Wheel Size in Millimeters
•
24 hour or 12 hour Clock Format
•
Time of Day
•
Temperature Unit of Measure, °F or °C
After a setting is confirmed, Vector will move on to the next setting in
order. If no button is pressed for 15 seconds, Vector will return to
Normal Mode.
Enter Data Setting Mode:
TO ENTER DATA SETTING MODE, HOLD DOWN ALL THREE
BUTTONS FOR 3 SECONDS
All digits will light up.
Release buttons to
continue.
18
- Quick Links:
- Quick Start
- Specifications
- Reset Button
- Installation
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Vector and is the answer not in the manual?
Questions and answers
how to change time
To change the time on a Trail Tech Vector:
1. Enter Data Setting Mode.
2. Cycle between 12-hour and 24-hour format by pressing the Left button. Confirm by pressing the Center button.
3. To set the time of day:
- Modify the flashing digit by pressing the Left button.
- Change to the next digit by pressing the Right button.
- Confirm each digit by pressing the Center button.
This answer is automatically generated