Table of Contents
Advertisement
Overview:
You will use the wheel size number when setting up the computer for
your machine. Use Method 1, 2 or 3.
Method 1)
Easy Ruler
Method:
Find the
circumference
of front wheel
by measuring
its diameter in
millimeters. Multiply
the Wheel Diameter
by 3.14. The result is your
wheel size.
Method 2)
Rolling Measurements:
On a flat surface, mark the tire sidewall and the ground with a marking
pen. Roll the wheel until the mark on the tire completes one revolution
and is back on the ground. Mark the ground at this location. Measure
the distance between the marks on the ground and convert the
measurement to mm (multiply inches by 25.4). Use this number for
your wheel size. For accuracy, the rider's weight should be on the
bike when making this measurement.
16
Installation
Wheel Size=
Wheel Diameter(mm)
x 3.14
Diameter(mm)
x 3.14
- Quick Links:
- Quick Start
- Specifications
- Reset Button
- Installation
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Vector and is the answer not in the manual?
Questions and answers
how to change time
To change the time on a Trail Tech Vector:
1. Enter Data Setting Mode.
2. Cycle between 12-hour and 24-hour format by pressing the Left button. Confirm by pressing the Center button.
3. To set the time of day:
- Modify the flashing digit by pressing the Left button.
- Change to the next digit by pressing the Right button.
- Confirm each digit by pressing the Center button.
This answer is automatically generated