Enter Or Exit Lap Timer Mode; Start / Stop Lap Timer; Signal New Lap - Trail Tech Vector User Manual

Enter or Exit Lap Timer Mode:

ENTER OR EXIT LAP TIMER MODE
FROM NORMAL MODE BY HOLDING
THE TOP AND BOTTOM BUTTONS ON
THE REMOTE SWITCH FOR 3 SECONDS.
The LAP icon will appear indicating Vector is in lap timer mode.
The remote switch is required to enter lap timer mode.

Start / Stop Lap Timer:

Confirm Vector is in lap timer mode by checking for the LAP icon.
• When lap mode is first entered, "ON" will be visible, the lap timer
active and Vector will be waiting for wheel data.
• Vector waits for two wheel revolutions before collecting data
(in order to activate on the start line, but before the start signal.)
• "ON" will appear when lap timer is activated or running.
• "LAP" will appear when the lap timer is stopped; after 3 seconds
"LAP" will change to "OFF".
TO START OR STOP COLLECTING
LAP DATA, PRESS THE TOP BUTTON.

Signal New Lap:

At the beginning of each new lap, press the bottom button on the
remote switch to end the current lap and begin a new lap. Vector will
display "LAP" for 3 seconds when the new lap begins. Repeat for
each new lap. Press the top button at the race end to stop the lap
timer.
TO SIGNAL A NEW LAP, PRESS THE
BOTTOM BUTTON WHEN LAP TIMER
IS ACTIVATED OR RUNNING.
36
Lap Timer Mode