Download  Print this page

Kenmore E L I T REVERSE OSMOSIS SYSTEM 625.38556 Owner's Manual page 7

Reverse osmosis system
Hide thumbs

Advertisement

OVERVIEW
There are seven easy steps to installing
your Drinking
Water system. They are as follows:
STEP 1 - install Cold Water Supply fitting
STEP
STEP
STEP
STEP
STEP
STEP
2 - install Drain Adapter
3 - install Reverse Osmosis
Assembly
4 - install Storage Tank
5 - install Reverse Osmosis
Faucet
6 - Connect Tubing
7 - Sanitize, Pressure
Test, Purge System
These steps are explained
in detail over the next few
pages.
it is recommended
to read through
the entire manual
before beginning
your installation.
Follow all steps exact-
ly. Reading
this manual
will also help you receive and
use all the benefits your Reverse Osmosis
System can
give you.
Figure 4
PREPARE
SITE FOR INSTALLATION
1. Before starting,
close the hot and cold water shutoff
valves (See Figure 5).
2. Temporarily
place tank and filter assembly
into cabi-
net. Double
check position
of items and space required
for proper installation.
3. Remove tank and filter from cabinet and set aside.
NOTE: You must check and comply with all local
plumbing
codes.
Questions?
Call The Kenmore
Water Line 1-800-426-9345
or visit KenmoreWater.com

Advertisement

loading

  Also See for Kenmore E L I T REVERSE OSMOSIS SYSTEM 625.38556

  Related Manuals for Kenmore E L I T REVERSE OSMOSIS SYSTEM 625.38556

This manual is also suitable for:

Ultrafilter 650 625.385560