Download  Print this page

Kenmore E L I T REVERSE OSMOSIS SYSTEM 625.38556 Owner's Manual page 16

Reverse osmosis system
Hide thumbs

Advertisement

SANITIZE
THE
SYSTEM
Sanitizing
is recommended
immediately
after installation
of the Reverse Osmosis
system. It's also recommended
after servicing
inner parts. It is important
that the person
installing
or servicing
the system have clean hands while
handling
inner parts of the system.
Complete
the following
steps to sanitize the system.
See Figure 22.
1. Turn off the water supply
to the Reverse Osmosis
sys-
tem.
2. Open the Reverse Osmosis
faucet,
if the tank is not
already
empty, allow the water to empty:
3. Locate the eyedropper
that is included
in package
and
common
household
bleach (5.25%).
4. Add 3 ml. of bleach into open end of yellow tank tub-
ing. Handle bleach according
to bleach manufacturer's
recommendations.
See Figure 22.
5. Connect yellow tank tubing to tank connector.
See
Figures 12 and 22.
6. Sanitizing
the system will be completed
during
the
pressure
test and purging
steps on the following
page.
NOTE: The bleach must be removed
from the system
before drinking
the water. See purging
instructions
on
the next page.
!
Figure 22
Questions?
Call The Kenmore
Water Line i-800-426-9345
or visit KenmoreWater.com
16

Advertisement

loading

  Also See for Kenmore E L I T REVERSE OSMOSIS SYSTEM 625.38556

  Related Manuals for Kenmore E L I T REVERSE OSMOSIS SYSTEM 625.38556

This manual is also suitable for:

Ultrafilter 650 625.385560